Case 47 — QC checklist: prioritise observable faults over pixel hunting · source wording exercise
Clarification for “QC checklist: prioritise observable faults over pixel hunting”: the point beginning “Explain what the full-size image shows, what the crop adds and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 39 — Strap compatibility: width is only the first measurement · source wording exercise
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Avoid forcing an assembly that does not fit and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 21 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The reported numbers alone do not establish damage or the need for service. Confirm the setup, collect comparable readings and ask a watchmaker to assess a concerning or changing pattern.
Case 29 — Reading a timegrapher recording without losing the context
The supplied screen shows a rate but does not identify the lift angle, position or winding state. Which observations should accompany the recording?
Exercise RWF-31198/29: address this question within its stated limits.
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 31 — Comparing dial colour under different lighting
Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “State the lighting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 28 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 52 — First QC request: the minimum useful information · source wording exercise
Limit of the answer in “First QC request: the minimum useful information”: “Include complete instrument settings where relevant and say…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 127 — Packing photographs: document condition without exposing an address · documentation exercise
Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Remove names, addresses, barcodes and tracking tokens from public…”; the related point is “Photograph the item and protective packing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: documentation. Distinguish an original record from a proposed record format.
Case 32 — QC photography: what photos actually help verify a pre-owned listing?
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Case 28 — Maintenance question: how do I tell if an automatic actually needs service?
Common advice says service every five years, but service is expensive and some people run watches much longer. What observable signs actually indicate a mechanical watch needs attention, as opposed to just being due on a calendar?
Exercise RWF-26582/28: address this question within its stated limits.
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Use a similar camera distance and neutral wrist position; photographs support…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 41 — Reading a timegrapher recording without losing the context · source wording exercise
Correction note for “Reading a timegrapher recording without losing the context”: retain the wording beginning “A single number cannot establish service condition, movement identity…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.