Case 25 — Packing photographs: document condition without exposing an address
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 20 — Packing photographs: document condition without exposing an address
Method note for “Packing photographs: document condition without exposing an address”: use “Photograph the item and protective packing…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Case 33 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Check whether a compatible half-link exists for the exact bracelet reference. Compatibility involves the connection and hardware, not just width. Ask a watchmaker if the correct part is uncertain.
Case 38 — Comparing dial colour under different lighting · source wording exercise
Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “Compare controlled images where available and avoid calling a…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 30 — Movement identification: the limits of a rotor photograph
Correction note for “Movement identification: the limits of a rotor photograph”: retain the wording beginning “Describe visible bridge shapes and markings separately…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Limit of the answer in “Crystal reflections: why a dark patch is not a coating test”: “Compare multiple controlled angles and describe the visible observation without asserting…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 26 — What a water-resistance claim does and does not establish
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 36 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
A stated water-resistance rating does not establish the present condition of an individual watch. Separate the manufacturer specification from a dated inspection or test of the particular example.
Case 21 — Crystal reflections: why a dark patch is not a coating test
Limit of the answer in “Crystal reflections: why a dark patch is not a coating test”: “No single lighting setup settles…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 4 — Comparing versions without mixing case sizes
Summary draft for “Comparing versions without mixing case sizes”: the answer addresses “Match reference, dimensions and…”; the related point is “List confirmed differences separately from seller descriptions and date the comparison…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 48 — A maintenance log that remains useful after a sale · source wording exercise
Clarification for “A maintenance log that remains useful after a sale”: the point beginning “Redact addresses and payment information; do not invent service…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.