Case 11 — Service enquiry: information a watchmaker can use
Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Document when it stops, winding behaviour, recent impacts and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 6 — Service enquiry: information a watchmaker can use
Document when it stops, winding behaviour, recent impacts and the positions in which it happens. Be honest about the watch and request an assessment before approving work or ordering parts.
A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.
Case 43 — Magnetism and rate: record evidence before naming a cause · source wording exercise
Reader check for “Magnetism and rate: record evidence before naming a cause”: distinguish the discussion point “A competent watchmaker can test and diagnose it; random adjustment…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 18 — Case finishing: distinguish a reflection from a surface mark
Limit of the answer in “Case finishing: distinguish a reflection from a surface mark”: “Ask for photographs with the light moved and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 23 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Differences in pigment, applied area, thickness and colour can affect appearance. Keep those design differences separate from claims about quality and use matched conditions for any comparison.
Case 33 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Lume photos are close to useless for comparison unless exposure is fixed. Phones raise exposure automatically in the dark, so a dim watch can look as bright as a strong one. For a fair photo comparison: same charge method, same delay after charging, manual exposure, and both watches in the same frame.
Case 15 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
A useful table has columns for date, position, winding state, lift angle, rate, amplitude and beat error. Keep the full recording so settings and stability can be checked.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 11 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
For a two-watch comparison, the practical order is usually case dimensions first, then power reserve if you rotate, then caliber for serviceability. Jewel count comes last. Complications only matter if you'll use them. Can you say what the two candidates are, in generic terms like 'dive style vs dress style'? The priorities shift a lot between those.
Case 21 — Lume comparison: keep exposure and charging conditions consistent
Correction note for “Lume comparison: keep exposure and charging conditions consistent”: retain the wording beginning “Treat the comparison…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 6 — Service enquiry: information a watchmaker can use
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 40 — Case finishing: distinguish a reflection from a surface mark · source wording exercise
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “A mark should be assessed across multiple views; aggressive polishing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 33 — What a water-resistance claim does and does not establish
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.