Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Forum Replies Created
Case 37 — Strap compatibility: width is only the first measurement · source wording exercise
Reader check for “Strap compatibility: width is only the first measurement”: distinguish the discussion point “Avoid forcing an assembly that does not fit and…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 110 — Date window centring: compare the same date at the same angle · documentation exercise
Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Keep the uncropped originals alongside the detail crops and distinguish…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: documentation. Distinguish an original record from a proposed record format.
Case 10 — Movement identification: the limits of a rotor photograph
Summary draft for “Movement identification: the limits of a rotor photograph”: the answer addresses “Describe visible bridge shapes and markings separately…”; the related point is “Ask a qualified watchmaker to inspect it if identification matters for…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 5 — Movement identification: the limits of a rotor photograph
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Clarifying question: does anyone in the thread have access to both versions at once? Without simultaneous comparison, every claim either way is weak evidence. If not, the next best option is photos with a grey card in frame and white balance locked or set manually, which at least makes separate photos roughly comparable.
Case 42 — Clasp photographs: what to request before judging alignment · source wording exercise
Summary draft for “Clasp photographs: what to request before judging alignment”: the answer addresses “Separate cosmetic alignment from whether the clasp engages reliably;…”; the related point is “Request open and closed views from both sides,…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 17 — Crown operation: when a forum cannot diagnose the resistance
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 22 — Model comparison: dive bezel action and alignment, how to compare fairly
On alignment, a clarifying point: is the misalignment visible straight on, or only from an angle? Parallax on a raised bezel can make a perfectly aligned pip look half a click off when viewed slightly from the side. Photograph straight above the dial before calling it misaligned.
Case 32 — Model comparison: dive bezel action and alignment, how to compare fairly
Back-play is the most objective feel measurement. Set the bezel on a click and gently push it the other way without forcing it. Noticeable wobble before it engages means play. A little is common and within normal production, but if one model has visible movement and the other doesn't, that's a real difference you can describe.
Case 14 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Power reserve is how long the watch runs from full wind until it stops. It matters if you rotate watches: a 38-hour reserve may stop over a weekend off the wrist, while 70-plus hours may not. One clarifying point is that rate stability often gets worse near the end of the reserve, so the full figure is not all precision-grade running time.
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Clarification for “Forum comparison archive: link the evidence and the correction”: the point beginning “Add a dated correction near the original conclusion…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 10 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Use a correction row with date, old value, revised value and evidence. A worked example could change a lug-width entry from 20 to 22 mm; do not present that example as a correction to a real model.
Case 20 — Strap compatibility: width is only the first measurement
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Measure the lug opening and document bar diameter,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.