Case 103 — Model comparison: dive bezel action and alignment, how to compare fairly · comparison exercise
Correction note for “Model comparison: dive bezel action and alignment, how to compare fairly”: retain the wording beginning “Alignment can be measured, so…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Make the basis of a comparison explicit before interpreting it.
Case 3 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 34 — Lume comparison: keep exposure and charging conditions consistent
Two glowing dials are shown with different camera exposure and unknown charging time. What can the images establish?
Exercise RWF-24037/34: address this question within its stated limits.
Case 8 — What a water-resistance claim does and does not establish
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 13 — First QC request: the minimum useful information
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 23 — First QC request: the minimum useful information
Limit of the answer in “First QC request: the minimum useful information”: “State the model configuration, the specific concern and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 5 — QC checklist: prioritise observable faults over pixel hunting
Summary draft for “QC checklist: prioritise observable faults over pixel hunting”: the answer addresses “Start with function, legibility, assembly and…”; the related point is “Explain what the full-size image shows, what the crop adds and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarifying question: what does daily wear mean for you? Desk work, manual labour or sports change the answer. For desk use, sapphire's scratch resistance is the main benefit. For work with frequent knocks, a slightly domed acrylic that you can polish may last longer in practice, despite the scratches.
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 1 — Comparing versions without mixing case sizes
Summary draft for “Comparing versions without mixing case sizes”: the answer addresses “Match reference, dimensions and…”; the related point is “List confirmed differences separately from seller descriptions and date the comparison…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 11 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Summary. Pick sapphire for scratch resistance in low-impact use, acrylic for impact tolerance and easy polishing, and mineral as a low-cost middle option. Prefer inner-surface AR if you're worried about wear. Look at crystal profile when comparing thickness. Choose by how you'll use the watch, not by the material label.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 30 — What a water-resistance claim does and does not establish
Clarification for “What a water-resistance claim does and does not establish”: the point beginning “Ask a qualified watchmaker about a suitable test for that individual…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 23 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
A correction to a common assumption: a slightly loose fit isn't automatically wrong. Heavier heads tend to slide on loose bracelets, but a lighter watch often wears comfortably with a finger's width of space. Try 'loose' for a full day before deciding it doesn't work. Comfort over hours tells you more than the first minute.