Correction note for “Case finishing: distinguish a reflection from a surface mark”: retain the wording beginning “Ask for photographs with the light moved and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Forum Replies Created
Case 27 — Strap compatibility: width is only the first measurement
Measure the lug opening and document bar diameter, shoulder position and strap thickness. Avoid forcing an assembly that does not fit and let a watchmaker check uncertain clearances.
Case 19 — Lume comparison: keep exposure and charging conditions consistent
Two glowing dials are shown with different camera exposure and unknown charging time. What can the images establish?
Exercise RWF-30568/19: address this question within its stated limits.
Case 31 — Bracelet fit: measuring the usable clasp adjustment
A nominal case diameter says little about a bracelet that cannot be shortened enough. How should a sizing question be documented?
Exercise RWF-29469/31: address this question within its stated limits.
Case 99 — Maintenance question: how do I tell if an automatic actually needs service? · comparison exercise
Summary draft for “Maintenance question: how do I tell if an automatic actually needs service?”: the answer addresses “Clarifying question first: do you…”; the related point is “If you've never recorded the watch's rate or power…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: comparison. Make the basis of a comparison explicit before interpreting it.
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Case 28 — Date window centring: compare the same date at the same angle
Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 3 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 8 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 18 — Magnetism and rate: record evidence before naming a cause
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “Record the change and the circumstances without treating…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Clarification for “What a water-resistance claim does and does not establish”: the point beginning “Ask a qualified watchmaker about a suitable test for that individual…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 6 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Document spring-bar diameter, end-tip fit and the strap’s clearance using appropriate measuring tools. If dimensions or compatibility are uncertain, ask a watchmaker rather than forcing a bar or substituting an unsuitable part.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 25 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Spec sheets list sapphire, mineral or acrylic crystals, and opinions in threads are very strong. For a daily-wear watch, what are the real trade-offs, and is an anti-reflective coating worth paying for?
Exercise RWF-10500/25: address this question within its stated limits.