Case 22 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Resolution checklist. 1) Rebalance links around the clasp. 2) Test every micro-adjust hole with each link count. 3) Check fit morning and afternoon. 4) Look for half-links by bracelet reference. 5) Accept slightly loose if the head is light. If none of that works, a strap with finer hole spacing is a reasonable conclusion, not a failure.
Case 89 — Magnetism and rate: record evidence before naming a cause · comparison exercise
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “Record the change and the circumstances without treating…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: comparison. Make the basis of a comparison explicit before interpreting it.
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 14 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 29 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Clarifying question: what does daily wear mean for you? Desk work, manual labour or sports change the answer. For desk use, sapphire's scratch resistance is the main benefit. For work with frequent knocks, a slightly domed acrylic that you can polish may last longer in practice, despite the scratches.
Case 3 — Date window centring: compare the same date at the same angle
Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 33 — Disputed observation: is this dial colour shift real or just lighting?
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.
Correction note for “Crown operation: when a forum cannot diagnose the resistance”: retain the wording beginning “Describe whether resistance occurs during winding or setting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.
Add a dated correction near the original conclusion and link the new evidence. Preserve the reasoning trail instead of silently replacing an uncertain claim with a confident one.
Case 24 — Movement identification: the limits of a rotor photograph
Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Describe visible bridge shapes and markings separately…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
First identify the caliber, lift-angle setting, winding state and measurement position. Without those fields, the rate, amplitude and beat-error values lack enough context for a useful comparison.
Method note for “Lume comparison: keep exposure and charging conditions consistent”: use “Repeat with equal light source, charging duration, elapsed time and camera…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 10 — Packing photographs: document condition without exposing an address
Method note for “Packing photographs: document condition without exposing an address”: use “Photograph the item and protective packing…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.