Case 14 — What a water-resistance claim does and does not establish
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 19 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
Case 84 — Crown operation: when a forum cannot diagnose the resistance · comparison exercise
Limit of the answer in “Crown operation: when a forum cannot diagnose the resistance”: “Describe whether resistance occurs during winding or setting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: comparison. Make the basis of a comparison explicit before interpreting it.
Method note for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: use “A bright initial glow followed by a steep drop…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Measure the lug opening and document bar diameter, shoulder position and strap thickness. Avoid forcing an assembly that does not fit and let a watchmaker check uncertain clearances.
Case 8 — A maintenance log that remains useful after a sale
Correction note for “A maintenance log that remains useful after a sale”: retain the wording beginning “Keep the date, work performed, provider invoice reference…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 23 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Resolution checklist. 1) Rebalance links around the clasp. 2) Test every micro-adjust hole with each link count. 3) Check fit morning and afternoon. 4) Look for half-links by bracelet reference. 5) Accept slightly loose if the head is light. If none of that works, a strap with finer hole spacing is a reasonable conclusion, not a failure.
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.
Case 41 — QC photographs: perspective or a genuinely tilted index? · source wording exercise
Summary draft for “QC photographs: perspective or a genuinely tilted index?”: the answer addresses “Compare two independently aligned images before drawing a conclusion; an overlay…”; the related point is “Request a level straight-on image with the hands…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 27 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
For a two-watch comparison, the practical order is usually case dimensions first, then power reserve if you rotate, then caliber for serviceability. Jewel count comes last. Complications only matter if you'll use them. Can you say what the two candidates are, in generic terms like 'dive style vs dress style'? The priorities shift a lot between those.
Case 31 — Service enquiry: information a watchmaker can use
Summary draft for “Service enquiry: information a watchmaker can use”: the answer addresses “Document when it stops, winding behaviour, recent impacts and…”; the related point is “Be honest about the watch and request an assessment…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Comparing versions without mixing case sizes”: retain the wording beginning “Match reference, dimensions and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 18 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Summary. Pick sapphire for scratch resistance in low-impact use, acrylic for impact tolerance and easy polishing, and mineral as a low-cost middle option. Prefer inner-surface AR if you're worried about wear. Look at crystal profile when comparing thickness. Choose by how you'll use the watch, not by the material label.
Keep the date, work performed, provider invoice reference and test results where available. Redact addresses and payment information; do not invent service events to fill an empty history.