Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Forum Replies Created
Case 6 — Crown operation: when a forum cannot diagnose the resistance
Summary draft for “Crown operation: when a forum cannot diagnose the resistance”: the answer addresses “Describe whether resistance occurs during winding or setting and…”; the related point is “Stop forcing it and arrange inspection rather than trying…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 68 — Lume questions: why does my lume fade so quickly, and how should I compare it? · source wording exercise
Correction note for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: retain the wording beginning “Afterglow fades fastest in the first minutes and then settles to…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Be honest about the watch and request an assessment…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 2 — Strap compatibility: width is only the first measurement
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: retain the wording beginning “First, a clarifying question: how many links are on each…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 20 — Comparing versions without mixing case sizes
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.
Case 6 — What a water-resistance claim does and does not establish
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 10 — Crystal reflections: why a dark patch is not a coating test
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 20 — Lume comparison: keep exposure and charging conditions consistent
Correction note for “Lume comparison: keep exposure and charging conditions consistent”: retain the wording beginning “Treat the comparison…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Summary draft for “Forum comparison archive: link the evidence and the correction”: the answer addresses “Add a dated correction near the original conclusion…”; the related point is “Preserve the reasoning trail instead of silently replacing an…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Can the same settings and winding state be used for several positions? Record each position separately rather than combining measurements taken under different conditions.
Case 34 — Clasp photographs: what to request before judging alignment
Method note for “Clasp photographs: what to request before judging alignment”: use “Request open and closed views from both sides,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 34 — Packing photographs: document condition without exposing an address
Limit of the answer in “Packing photographs: document condition without exposing an address”: “Photograph the item and protective packing…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.