Case 18 — Forum comparison archive: link the evidence and the correction
Correction note for “Forum comparison archive: link the evidence and the correction”: retain the wording beginning “Add a dated correction near the original conclusion…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
A complication is any function beyond hours, minutes and seconds. A date window counts, technically, and so do a chronograph, GMT hand or moon phase. More complications usually mean more parts, more thickness and more service cost. For a first everyday watch, decide which functions you'd really use before treating them as value.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Sealing and movement performance are separate questions. Ask a qualified watchmaker about inspection and testing appropriate to the particular watch and its intended use; a healthy rate does not establish water resistance.
Clarification for “Model comparison: dive bezel action and alignment, how to compare fairly”: the point beginning “Separate three properties: click count (60 or 120 positions), feel (how…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Case 30 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.
Case 12 — Crystal reflections: why a dark patch is not a coating test
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.